Add a metric

This guide will show you how to create a new Viash component.

A metric is a quantitative measure used to evaluate the performance of the different methods in solving the specific task problem.

This guide will show you how to create a new Viash component. In the following we will show examples for both Python and R. Note that the Task template repo is used throughout the guide, so make sure to replace any occurrences of "task_template" with your task of interest.

Tip

Make sure you have followed the “Getting started” guide.

Step 1: Create a new component

Use the create_*_metric.sh script found in the scripts repository to start creating a new metric. Open the script and update the name parameter to the desired name of the method.

scripts/create_component/create_python_metric.sh
Check inputs
Check language
Check API file
Read API file
Create output dir
Create config
Create script
Done!
scripts/create_component/create_python_metric.sh
common/scripts/create_component \
  --name my_python_metric \
  --language python \
  --type metric

This will create a new folder at src/metrics/my_python_metric containing a Viash config and a script.

src/metric/my_python_metric
    ├── script.py                    Script for running the metric.
    ├── config.vsh.yaml              Config file for metric.
    └── ...                          Optional additional resources.
scripts/create_component/create_r_metric.sh
Check inputs
Check language
Check API file
Read API file
Create output dir
Create config
Create script
Done!
scripts/create_component/create_r_metric.sh
common/scripts/create_component \
  --name my_r_metric \
  --language r \
  --type metric

This will create a new folder at src/metrics/my_r_metric containing a Viash config and a script.

src/metrics/my_r_metric
    ├── script.R                     Script for running the metric.
    ├── config.vsh.yaml              Config file for metric.
    └── ...                          Optional additional resources.

Change the --name to a unique name for your metric. It must match the regex [a-z][a-z0-9_]* (snakecase).

  • A config file contains metadata of the component and the dependencies required to run it. In steps 2 and 3 we will fill in the required information.
  • A script contains the code to run the metric. In step 4 we will edit the script.
Tip

Some tasks have multiple metric subtypes (e.g. batch_integration), which will require you to use a different value for --type corresponding to the desired metric subtype.

Step 2: Fill in metadata

The Viash config contains metadata of your metric, which script is used to run it, and the required dependencies.

Generated config file

This is what the config.vsh.yaml generated by the create_component component looks like:

Contents of config.vsh.yaml 
# The API specifies which type of component this is.
# It contains specifications for:
#   - The input/output files
#   - Common parameters
#   - A unit test
__merge__: ../../api/comp_metric.yaml


# A unique identifier for your component (required).
# Can contain only lowercase letters or underscores.
name: my_python_metric

# Metadata for your component
info:
  metrics:
    # A unique identifier for your metric (required).
    # Can contain only lowercase letters or underscores.
    name: my_python_metric
    # A relatively short label, used when rendering visualisarions (required)
    label: My Python Metric
    # A one sentence summary of how this metric works (required). Used when 
    # rendering summary tables.
    summary: "FILL IN: A one sentence summary of this metric."
    # A multi-line description of how this component works (required). Used
    # when rendering reference documentation.
    description: |
      FILL IN: A (multi-line) description of how this metric works.
    # A reference key from the bibtex library at src/common/library.bib (required).
    reference: bibtex_reference_key
    # URL to the documentation for this metric (required).
    documentation_url: https://url.to/the/documentation
    # URL to the code repository for this metric (required).
    repository_url: https://github.com/organisation/repository
    # The minimum possible value for this metric (required)
    min: 0
    # The maximum possible value for this metric (required)
    max: 1
    # Whether a higher value represents a 'better' solution (required)
    maximize: true

# Component-specific parameters (optional)
# arguments:
#   - name: "--n_neighbors"
#     type: "integer"
#     default: 5
#     description: Number of neighbors to use.

# Resources required to run the component
resources:
  # The script of your component (required)
  - type: python_script
    path: script.py
  # Additional resources your script needs (optional)
  # - type: file
  #   path: weights.pt

engines:
  # Specifications for the Docker image for this component.
  - type: docker
    image: ghcr.io/openproblems-bio/base_images/python:1.1.0
    # Add custom dependencies here (optional). For more information, see
    # https://viash.io/reference/config/engines/docker/#setup .
    # setup:
    #   - type: python
    #     packages: scib==1.1.5

runners:
  # This platform allows running the component natively
  - type: executable
  # Allows turning the component into a Nextflow module / pipeline.
  - type: nextflow
    directives:
      label: [midtime,midmem,midcpu]
Contents of config.vsh.yaml 
# The API specifies which type of component this is.
# It contains specifications for:
#   - The input/output files
#   - Common parameters
#   - A unit test
__merge__: ../../api/comp_metric.yaml


# A unique identifier for your component (required).
# Can contain only lowercase letters or underscores.
name: my_r_metric

# Metadata for your component
info:
  metrics:
    # A unique identifier for your metric (required).
    # Can contain only lowercase letters or underscores.
    name: my_r_metric
    # A relatively short label, used when rendering visualisarions (required)
    label: My R Metric
    # A one sentence summary of how this metric works (required). Used when 
    # rendering summary tables.
    summary: "FILL IN: A one sentence summary of this metric."
    # A multi-line description of how this component works (required). Used
    # when rendering reference documentation.
    description: |
      FILL IN: A (multi-line) description of how this metric works.
    # A reference key from the bibtex library at src/common/library.bib (required).
    reference: bibtex_reference_key
    # URL to the documentation for this metric (required).
    documentation_url: https://url.to/the/documentation
    # URL to the code repository for this metric (required).
    repository_url: https://github.com/organisation/repository
    # The minimum possible value for this metric (required)
    min: 0
    # The maximum possible value for this metric (required)
    max: 1
    # Whether a higher value represents a 'better' solution (required)
    maximize: true

# Component-specific parameters (optional)
# arguments:
#   - name: "--n_neighbors"
#     type: "integer"
#     default: 5
#     description: Number of neighbors to use.

# Resources required to run the component
resources:
  # The script of your component (required)
  - type: r_script
    path: script.R
  # Additional resources your script needs (optional)
  # - type: file
  #   path: weights.pt

engines:
  # Specifications for the Docker image for this component.
  - type: docker
    image: ghcr.io/openproblems-bio/base_images/r:1.1.0
    # Add custom dependencies here (optional). For more information, see
    # https://viash.io/reference/config/engines/docker/#setup .
    # setup:
    #   - type: r
    #     packages: tidyverse

runners:
  # This platform allows running the component natively
  - type: executable
  # Allows turning the component into a Nextflow module / pipeline.
  - type: nextflow
    directives:
      label: [midtime,midmem,midcpu]

Required metadata fields

Please make sure that the following fields in the config file are filled in. The metrics component can contain several metric values these are listed in the info.metrics.

Step 3: Add dependencies

Each component has it’s own set of dependencies, because different components might have conflicting dependencies.

base images

For your convenience we have created several base images that can be used for python or R scripts. These images can be found in the OpenProblems docker repo base_images. Click on the packages to view the url you need to use. You are not required to use these images but install the required packages to make sure OpenProblems works properly.

  • openproblems/base_python Base image for python scripts.

  • openproblems/base_r Base image for R scripts.

  • openproblems/base_pytorch_nvidia Base image for scripts that use pytorch with nvidia gpu support.

  • openproblems/base_tensorflow_nvidia Base image for scripts that use tensorflow with nvidia gpu support.

custom image

Update the setup definition in the platforms section of the config file. This section describes the packages that need to be installed in the Docker image and are required for your method to run.

If you’re using a custom image use the following minimum setup:

platforms:
  - type: docker
    Image: your custom image
    setup:
      - type: apt
        packages:
          - procps
      - type: python
        packages:
          - anndata~=0.10.0
          - scanpy~=1.10.0
          - pyyaml
          - requests
          - jsonschema
        github: openproblems-bio/core#subdirectory=packages/python/openproblems
platforms:
  - type: docker
    Image: your custom image
    setup:
      - type: apt
        packages:
          - procps
          - libhdf5-dev
          - libgeos-dev
          - python3
          - python3-pip
          - python3-dev
          - python-is-python3
      - type: python
        packages:
          - rpy2
          - anndata~=0.10.0
          - scanpy~=1.10.0
          - pyyaml
          - requests
          - jsonschema
          github: openproblems-bio/core#subdirectory=packages/python/openproblems
      - type: r
        packages:
          - anndata
          - BiocManager
          - reticulate
          - bit64
        github:
          - openproblems-bio/core/packages/r/openproblems

Please check out this guide for more information on how to add extra package dependencies.

Note

Tip: After making changes to the components dependencies, you will need to rebuild the docker container as follows:

viash run src//metrics/my_python_metric/config.vsh.yaml -- \
  ---setup cachedbuild
Output 
[notice] Building container 'ghcr.io/openproblems-bio/task_template/metrics/my_python_metric:dev' with Dockerfile

Step 4: Edit script

A component’s script typically has five sections:

  1. Imports and libraries
  2. Argument values
  3. Read input data
  4. Generate results
  5. Write output data to file

Generated script

This is what the script generated by the create_component component looks like:

Contents of script.py 
import anndata as ad

## VIASH START
# Note: this section is auto-generated by viash at runtime. To edit it, make changes
# in config.vsh.yaml and then run `viash config inject config.vsh.yaml`.
par = {
  'input_solution': 'resources_test/.../solution.h5ad',
  'input_prediction': 'resources_test/.../prediction.h5ad',
  'output': 'output.h5ad'
}
meta = {
  'name': 'my_python_metric'
}
## VIASH END

print('Reading input files', flush=True)
input_solution = ad.read_h5ad(par['input_solution'])
input_prediction = ad.read_h5ad(par['input_prediction'])

print('Compute metrics', flush=True)
# metric_ids and metric_values can have length > 1
# but should be of equal length
uns_metric_ids = [ 'my_python_metric' ]
uns_metric_values = [ 0.5 ]

print("Write output AnnData to file", flush=True)
output = ad.AnnData(
  
)
output.write_h5ad(par['output'], compression='gzip')
Contents of script.R 
library(anndata)

## VIASH START
par <- list(
  input_solution = "resources_test/.../solution.h5ad",
  input_prediction = "resources_test/.../prediction.h5ad",
  output = "output.h5ad"
)
meta <- list(
  name = "my_r_metric"
)
## VIASH END

cat("Reading input files\n")
input_solution <- anndata::read_h5ad(par[["input_solution"]])
input_prediction <- anndata::read_h5ad(par[["input_prediction"]])

cat("Compute metrics\n")
# metric_ids and metric_values can have length > 1
# but should be of equal length
uns_metric_ids <- c("my_r_metric")
uns_metric_values <- c(0.5)

cat("Write output AnnData to file\n")
output <- anndata::AnnData(
  
)
output$write_h5ad(par[["output"]], compression = "gzip")

Required sections

Imports and libraries

In the top section of the script you can define which packages/libraries the metric needs. If you add a new or different package add the dependency to config.vsh.yaml in the setup field (see above).

Argument block

The Viash code block is designed to facilitate prototyping, by enabling you to execute directly by running python script.py (or Rscript script.R for R users). Note that anything between “VIASH START” and “VIASH END” will be removed and replaced with a CLI argument parser when the components are being built by Viash.

Here, the par dictionary contains all the arguments defined in the config.vsh.yaml file (including those from the defined __merge__ file). When adding a argument in the par dict also add it to the config.vsh.yaml in the arguments section.

Read input data

This section reads any input AnnData files passed to the component.

Generate results

This is the most important section of your script, as it defines the core functionality provided by the component. It processes the input data to create results for the particular task at hand.

Write output data to file

The output stored in a AnnData object and then written to an .h5ad file. The format is specified by the API file specified in the __merge__ field in the config file.

Step 5: Try component

Your component’s API file contains the necessary unit tests to check whether your component works and the output is in the correct format.

You can test your component by using the following command:

viash test src/metrics/my_python_metric/config.vsh.yaml
Output 
Running tests in temporary directory: '/tmp/viash_test_accuracy_16677419536314915077'
====================================================================
+/tmp/viash_test_accuracy_16677419536314915077/build_engine_environment/accuracy ---verbosity 6 ---setup cachedbuild ---engine docker
[notice] Building container 'ghcr.io/openproblems-bio/task_template/metrics/accuracy:test' with Dockerfile
[info] docker build -t 'ghcr.io/openproblems-bio/task_template/metrics/accuracy:test'  '/tmp/viash_test_accuracy_16677419536314915077/build_engine_environment' -f '/tmp/viash_test_accuracy_16677419536314915077/build_engine_environment/tmp/dockerbuild-accuracy-EnbrpP/Dockerfile'
#0 building with "default" instance using docker driver

#1 [internal] load build definition from Dockerfile
#1 transferring dockerfile: 565B done
#1 DONE 0.0s

#2 [internal] load metadata for docker.io/openproblems/base_python:1.0.0
#2 DONE 0.1s

#3 [internal] load .dockerignore
#3 transferring context: 2B done
#3 DONE 0.0s

#4 [1/2] FROM docker.io/openproblems/base_python:1.0.0@sha256:bbb0a093e275498bf905237c8cd26124d436f5d35d0f8dd1749c06d0a0a2e88c
#4 DONE 0.0s

#5 [2/2] RUN pip install --upgrade pip &&   pip install --upgrade --no-cache-dir "scikit-learn"
#5 CACHED

#6 exporting to image
#6 exporting layers done
#6 writing image sha256:e462d6ef46e39ced879fa0ab1ee448d0d76492b0d39ebb46f35ad0eeb7cc7bd8 done
#6 naming to ghcr.io/openproblems-bio/task_template/metrics/accuracy:test done
#6 DONE 0.0s
====================================================================
+/tmp/viash_test_accuracy_16677419536314915077/test_run_and_check_output/test_executable
>> Running test 'run'
>> Checking whether input files exist
>> Running script as test
Reading input files
Encode labels
Compute metrics
Write output AnnData to file
>> Checking whether output file exists
>> Reading h5ad files and checking formats
Reading and checking output
  AnnData object with n_obs × n_vars = 0 × 0
    uns: 'dataset_id', 'method_id', 'metric_ids', 'metric_values', 'normalization_id'
All checks succeeded!
====================================================================
+/tmp/viash_test_accuracy_16677419536314915077/test_check_config/test_executable
Load config data
Check .namespace
Check .info.type
Check component metadata
Check references fields
Check Nextflow runner
All checks succeeded!
====================================================================
SUCCESS! All 2 out of 2 test scripts succeeded!
Cleaning up temporary directory

Visit “Run tests” for more information on running unit tests and how to interpret common error messages.

You can also run your component on local files using the viash run command. For example:

viash run src/metrics/my_python_metric/config.vsh.yaml -- \
  --input_prediction resources_test/task_template/pancreas/prediction.h5ad \
  --input_solution resources_test/task_template/pancreas/solution.h5ad \
  --output output.h5ad

Next steps

If your component works, please create a pull request.